|
ROLL-O EN 13241-1
The Roll-O door
is a
high speed
roll up door that opens and closes using a vertical roll-up
operation, as with our other high-speed doors the Roll-O model is
suitable for applications where high speed opening and closing times
are required. This type of door is suited to both small and medium
size openings and designed for use where heavy traffic is present.
This type of door can be used in a range of applications including
stand-alone or combination use and is ideally suited for internal
applications where partitions are required between temperature
controlled, dusty, noisy or similar areas.
For
maximum safety, all
Roll-O doors
have a built in safety edge. Upon contact with an obstacle the door
stops and reverses automatically to avoid the risk of injury or
damage. All Roll-O doors are CE marked and comply with the
appropriate safety regulations EN 13241-1.
The
ROLL-O door is available
with a
variety of bespoke options and can be manufactured to include a
crash-proof system, this system ensures that in the event of any
impact by a vehicle, the door can easily be reset in a few seconds
without any special tools or skills.
As
with all our other
high-speed
doors, in the event of a power failure the ROLL-O door is supplied
with a manual override facility. This ensures the door can be easily
opened or closed in the event of power being severed from the door,
this override facility minimises on the risk of any inconvenience in
entering or leaving the affected area.
Technical
specifications:
UPPER
FRAMEWORK in
zinc-plated steel
or, on request, in stainless steel INOX 304.
GUARD
for motor and rolling
shaft
protection in zinc-plated steel or, in stainless steel INOX 304 as an
optional.
GUIDES
in zinc-plated steel
or, upon
request, in stainless steel INOX 304.
They
are equipped with with
nylon
brushes.
The
structure of roll-up
door is
self-bearing. It can be painted with any RAL colour.
CURTAIN
made in pvc coated
poliester,
680 gr/sqm, flame retardency cl. 2. Another versions available: pvc
coated poliester 900 gr/sqm, flame retardency cl. 2, or insulated
type 4 mm thick. It is possible to manufacture curtain with many
transparent sections, completely coloured one or personalized with
our Customers' logo.
CROSS
BARS either in
zinc-plated steel
or, in stainless steel INOX 304.
ROLLING
SHAFT in zinc-plated
steel or,
in stainless steel INOX 304 if requested.
SAFETY
DEVICES to european
regulations
in force (photocells, safety edge, blinker).
OPENING
DEVICES in case of
power
failure: handle on the motor unit or, at Customers' request,
counter-weight system.
STANDARD
CURTAIN
TECHNICAL DATA:
Flame
retardant Cl. 2
Fabric:
Polyester 1100 dtex
Total
weight: abt. 680
gr./sqm.
Fabric
strength: abt. 3.000
N/5 cm. in
warp and weft
Tear
strength: abt. 400 N in
warp and
weft
OPENING
DEVICES
-
push
button
-
photocell
-
pull
switch
-
remote
control
-
radar
-
magnetic
loops
DRIVE
UNIT installed
directly
on shaft consists of a self-breaking motorized reduction group IP 54
with rotating limit switch IP 55. Standard electrical voltage: 3 N
~400 V / 50 Hz. Other voltages available on request.
Wide
range of CONTROL PANELS
to
european regulations in force. As optional we can propose:
half-height or semi-automatic operation. industrial
doors high
speed roll up doors
|
