Road Barriers

 
Electromechanical barriers meet the requirements of rapid and intensive access control in parking places, residential complexes,  an so on.

Automatic barrier OCM-M940 max. 6 mtr. - 8 sec . opening

Steel frame  30/10 mm. welded and protected against the rust by the cataphoresis  .Dimension 370x235x1060 H.

IT IS POSSIBLE  TO FIX ON THE GROUND THE BARRIER SYSTEM BY NAGS OR  BY PLATE FOUNDATION (OPTIONAL)

THE FRAME IS COVERED BY THE  ALUMINIUM PANELS PRE-PAINTED
12/10 MM. RAL 3003.

THE FRAME  HAS  A METALLIC COVER PAINTED BLACK WITH  SYSTEM KEY, AND SAFETY-MICROSWITCH (WHEN THE COVER IS OPEN IT IS NOT POSSIBLE TO OPERATE THE BARRIER ELECTRICALLY)

THE MOTOR SINGLE PHASE 230V. 50760 HZ FAN COOLED.HEAVY DUTY
IS CONNECTED  BY A THOOT PULLEY AND BELT TO THE STEEL SCREW FOR THE MOUVEMENT.

THE STEEL SCREW DIAM.20 HAVE  A  ANTIFRICTION NUT (WHITE)  CONNECTED TO THE  PRIMARY SHAFT FOR THE  ROTATION OF THE ARM.

THE SHAFT IS SUPPORTED BY  A SPECIAL BUSHING FIXED ON THE FRAME

THE SHAFT IS MANUFACTURED WITH THE POSSIBILITY TO HAVE  THE ARM OF THE BARRIER IN RIGHT OR LEFT SIDE

THE  END  OF THE ARM’S ROTATION IS EFFECTED BY THE LIMIT SWITCHES  ADJUSTABLE WITH A CAMS

THER’IS ALSO A  STOPPER ABSORBER (SPRING BOWER)  FIXED ON THE PRIMARY SHAFT

THE MANUAL OPERATION IS EFFECTED WITH AN HANDLE, AFTER OPENING THE COVER

THE CONTROL BOX IS TYPE 5000 ALREADY CONNECTED.

THE ARM IS AN ALUMINIUM 80x30x2 WITH RED STIKERS

IT IS POSSIBLE TO SUPPLY  A   MOBILE SUPPORT  FIXED ON THE ARM, OR  A SUPPORT FIXED ON THE GROUND AND  SKIRT FOR THE ARM (OPTIONAL)